Mould Base

Approx. Rs 45,000 / Piece Get Latest Price

Product Brochure
^{DME mold bases and plates are manufactured with the highest quality materials on the most advanced, precision equipment in the industry. Pre-engineered assemblies, plates and components provide the economic and technical benefits of interchangeability. Greater metallurgical consistency and more cleanliness in cavity steels mean more reliability for customers.
Aaroh Marketing Company, being auhtorized dealer and distributor DME can supply 1. Standard Mold base 2. Customised mold base as per drawing.}

Approx. Rs 100 / Piece Get Latest Price

Product Brochure
 D-M-E Jiffy-Tite plugs used with D-M-E Jiffy-Tite (flow-thru type) Sockets and D-M-E Jiffy-Matic (automatic shut-off type) Sockets are designed for use with plastics molds and die-cast dies in water, air or oil lines. They feature a combination brass and stainless steel leakproof construction; have a maximum rated capacity of 200 psi; and withstand temperatures up to 400°F, with supplied Viton seals. D-M-E Jiffy-Tite and Jiffy-Matic Sockets can be used interchangeably with the same Jiffy-Tite Plugs already in your mold or die. Comparable sizes of both type sockets have the same O.D., permitting interchangeability even when the plugs are flush mounte

Approx. Rs 120 / Piece Get Latest Price

Product Brochure

• Holds the ejector assembly in alignment
• Supports the weight of the ejector assembly throughout the entire cycle
• Reduces wear on ejection components
• Prevents cocking of the ejector plates

Approx. Rs 2,000 / Piece Get Latest Price

Product Brochure
Available in three sizes with increasing weight holding capacities, the Slide Retainers can be used individually or in multiples for larger or heavier slides. 3 types to choose from: 1. MRT: the dowel pin installed in the slide positively locks into the retainer until disengaged by the mold’s closing action. Designed with a generous lead-in at the socket opening so the dowel pin will enter the socket even if there is a slight misalignment between the retainer and the pin. 2. PSM: similar to MRT but spring is completely enclosed and protected from contamination. 3. PSR: works without dowel pin so slide can be removed without removing slide retainer. Small in size yet strong holding power.

Approx. Rs 4,000 / Kg Get Latest Price

Product Brochure
Materion Brush Performance Alloys MoldMAX HH (High Hard) Alloy is the premier Beryllium Copper Flat Bar. This alloy has a hardness and strength comparable with standard tool steels but its thermal conductivity is at four to six times higher. MoldMAX HH Alloy is used for injection mold cores and cavities and blow mold pinch-offs. Its high hardness provides durability in applications where other high conductivity copper alloys fail. The alloy resists galling against other mold alloys, including itself.

Approx. Rs 475 / Piece Get Latest Price

D-M-E mold saver is an ideal protective coating for molds to be restored over a longer period of time. 
It protects polished cavities and all metal parts from costly corrosion damage. It's thin, transparent film averages about 0.0003" thick. 
It is soft,dry,waxy and can be easily wiped off without solvents. One can of mold saver covers about 80 sq. ft.

Approx. Rs 495 / Piece Get Latest Price

Product Brochure
DME makes mold cleaner and saver to give you the absolute best out of your injection mold supplies. When you buy a quality product from DME, you want to make sure that the product maintains its high standards. With a mold cleaner or saver from DME, you reduce overall cost for your company, because your product lasts longer.

The DME Mold Cleaner is mainly used to remove certain corrosion-forming substances. These substances include lactic acid, urea and sodium chloride. This fine product also provides up to 20 days of rust protection at temperatures to 120 degrees fahrenheit and 100 percent humidity. The DME Mold Saver protects polished cavities and all metal parts from costly corrosion and damage. The saver has a film that is soft, dry, waxy and only .0003" thick. When preventing your injection mold supplies from damaging, trust DME with mold cleaners and savers.

Approx. Rs 1,000 / Pack Get Latest Price

Product Brochure
DME Indexable Mold Dating Inserts (MDI) provide traceability required in part quality programs. Designed for plastics injection molds. Offering a distinctive indexable, snap-in-place arrow alignment, Indexable Mold Dating Inserts' unique design keeps the inner insert flush for three full turns.